Filter
Top Products
TECRA M2 4-5
Operating Basics
4. Make sure the screw in the Slim Select Bay lock is set in the hole for the
unlock position.
5. Slide the Slim Select Bay latch to the unlock position.
6. Grasp the DVD-ROM drive and slide it out.
Removing the DVD-ROM drive
Inserting a module
Insert the Slim Select Bay HDD adaptor as described below.
1. Insert the Slim Select Bay HDD adaptor in the computer as shown below
and press until the ejector clicks.
2. If you want to lock the Slim Select Bay module, set the Slim Select Bay
lock screw in the hole for the lock position. The lock screw is inserted in
the unlock position at the time of purchasing.
Inserting the Slim Select Bay HDD adaptor
The DVD-ROM drive and other Slim Select Bay modules can become hot
with use. Be careful when removing the module.
SILM SELECT BAY
MODULE
LOCK SCREW
SILM SELECT
BAY LATCH
LOCK SCREW
SILM SELECT BAY
M
ODULE