Filter
Top Products
TECRA M2 8-4
Optional Devices
Formatting an SD card
SD memory cards are sold with format in conformity to the Standards of SD
memory card. If you format the SD card again, be sure to format it with the
utility of TOSHIBA SD memory card format, not in the format defined as the
Windows standard format.
In order to run TOSHIBA SD memory card format, click windows start
button, point to All Programs, point to TOSHIBA, point to Utilities and click
SD memory card Format.
TOSHIBA SD memory card format does not format the protected area of
SD memory card. When you format all area of the SD memory card including
the protected area, use the application that responds to the copy protection
system.
Installing an SD card
To insert an SD card, follow the steps below.
1. Insert the SD card.
2. Press gently to ensure a firm connection.
Inserting an SD card
Removing an SD card
To remove an SD card, follow the steps below.
1. Open the Safely Remove Hardware icon on the system tray and
disablethe SD card.
2. Push in the card and release it to pop the card out slightly.
SD CARD
Make sure the SD card is oriented properly before you insert it.