Toshiba TECRA M2 Laptop User Manual


 
TECRA M2 1-6
Introduction
Display
The computer’s LCD panel supports high-resolution video graphics. The
screen can be set at a wide range of viewing angles for maximum comfort
and readability.
Keyboard
DVD±R/±RW drive
(DVD Dual drive)
Some models are equipped with a full- size
DVD±R/±RW drive module that lets you record
data to rewritable CD/DVDs as well as run either
12cm (4.72") or 8cm (3.15") CD/DVDs without
using an adaptor. It reads DVD-ROMs at
maximum 8 speed and CD-ROMs at maximum 24
speed. It writes CD-R at up to 16 speed, CD-RW
at up to 10 speed, DVD-R and DVD-RW at
maximum 2 speed. DVD+R and DVD+RW at
maximum 2.4 speed. This drive supports the
same formats as the DVD-ROM drive.
DVD-ROM DVD-Video
DVD-R DVD-RW
DVD+R DVD+RW
CD-DA CD-Text
Photo CD™ (single/multi-session)
CD-ROM Mode 1, Mode 2
CD-ROM XA Mode 2 (Form1, Form2)
Enhanced CD (CD-EXTRA)
CD-G (Audio CD only)
Addressing Method 2
Built-in 14.1" TFT screen, 16 M colors, with one of the
following resolutions:
XGA, 1024 horizontal x 768 vertical pixels
SXGA+, 1400 horizontal x 1050 vertical pixels
Graphics controller Graphics controller maximizes display
performance. Refer to Appendix C for more
information.
Built-in 85 keys or 86 keys, compatible with IBM
enhanced keyboard, embedded numeric overlay,
dedicated cursor control, and keys. See
Chapter 5, The Keyboard, for details.