Filter
Top Products
TECRA M2 4-11
Operating Basics
■ Writing with software other than Drag'n Drop CD+DVD has not been
confirmed. Therefore, operation with other software cannot be
guaranteed.
When writing or rewriting
Note the following when you write or rewrite a CD-R or CD-RW.
■ Always copy data from the HDD to the CD. Do not use cut-and-paste.
The original data will be lost if there is a write error.
■ Do not perform any of the following actions:
■ Change users in the Windows XP operating system.
■ Operate the computer for any other function, including use of a
mouse or Touch Pad, closing/opening the LCD panel.
■ Start a communication application such as a modem.
■ Apply impact or vibration to the PC.
■ Install, remove or connect external devices, including the following:
PC card, SD card, USB devices, external display, i.LINK devices,
optical digital devices.
■ Open the optical media drive.
■ If the media is poor in quality, dirty or damaged, writing or rewriting errors
may occur.
■ Set the computer on a level surface and avoid places subject to vibration
such as airplanes trains, or cars. Do not use an unstable surface such
as a stand.
■ Keep mobile phones and other wireless communication devices away
from the computer.
Writing CD/DVDs on DVD Multi drive
You can use the DVD Multi drive to write data to either CD-R/-RW or DVD-R/
-RW/-RAM discs. The following applications for writing are supplied on
CD-ROM:
Drag'n Drop CD+DVD, licensed by Easy Systems Japan Ltd., and DigiOn
Inc., InterVideo WinDVD Creator 2 Platinum, which is a product of
InterVideo, Inc.