Filter
Top Products
TECRA M2 8-2
Optional Devices
PC cards
The computer is equipped with a PC card expansion slot that can
accommodate one 5 mm Type II card. Any PC card that meets industry
standards (manufactured by TOSHIBA or other vendor) can be installed. The
slot supports 16-bit PC cards, including PC card 16’s multifunction card
and CardBus PC cards.
CardBus supports the new standard of 32-bit PC cards. The bus provides
superior performance for the greater demands of multimedia data
transmission.
Inserting a PC card
The PC card connector is located on the left side of the computer.
Windows’ hot-install feature lets you insert PC cards while the computer’s
power is on.
To insert a PC card, follow the steps below:
1. Insert the PC card.
2. Press gently to ensure a firm connection.
Inserting the PC card
After inserting the card, refer to the card’s documentation and check the
configuration in Windows to make sure it is appropriate for your card.
■ Do not insert a PC card while the computer is in standby or hibernation
mode. Some cards might not work properly.
■ An HDD or CD-ROM connected to a 16-bit PC card, might affect the
performance of the computer’s sound system and data transmission,
including slower transmission speeds and dialing errors.
PC CARD