Filter
Top Products
TECRA M2 4-6
Operating Basics
Using optical media drives
The text and illustrations in this section refer primarily to the DVD-ROM drive.
However, operation is the same for other optical drive in the Slim Select Bay.
The full-size drive provides high-performance execution of CD/DVD-ROM-
based programs. You can run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs
without an adaptor. An ATAPI interface controller is used for CD/DVD-ROM
operation. When the computer is accessing a CD/DVD-ROM, an indicator
on the drive glows and the Slim Select Bay indicator glows.
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on
CD-RW/DVD-ROM drive section for precautions on writing to CDs.
If you have a DVD Multi drive, refer also to the Writing CD/DVDs on DVD
Multi drive section for precautions on writing to CDs.
If you have a DVD±R/±RW drive, refer also to the Important message
(DVD±R/RW drive) section for precautions on writing to CDs.
Loading discs
To load CD/DVDs, follow the steps below and refer to next figures.
1. a. When the power is on, press the DVD-ROM eject button to open
the drawer slightly.
Pressing the DVD-ROM eject button
Use the WinDVD 4 application to view DVD-Video discs.
EJECT BUTTON