Filter
Top Products
W7 ASD Installation and Operation Manual 31
The Changed From Default feature allows the user to view (or change) the parameters that are
different from the default or the post-reset settings. Once the Changed From Default screen is
displayed, the system scrolls through all of the system parameters and halts once reaching a changed
parameter.
The Rotary Encoder may be clicked once clockwise to continue scrolling forward or clicked once
counterclockwise to begin scrolling in reverse. With each click of the Rotary Encoder from a stop, the
system scrolls through the parameters and stops at the next parameter that has been changed.
Pressing the Rotary Encoder while a changed parameter is displayed accesses the settings of the
changed parameter for viewing or changing.
Pressing ESC while the system is performing a Changed From Default search terminates the search.
Pressing ESC when done searching (or halted at a changed parameter) returns the system to the
Program menu.
Parameter settings may also be changed via Communications. See the 7-Series Serial
Communications Manual (P/N 53840) for further information on using communications to change
parameter settings. The 7-Series Serial Communications Manual may be acquired from the
TIC.Toshiba.com website at Literature
Manuals Drives Manuals or from your Toshiba Sales
Representative.