Filter
Top Products
64 W7 ASD Installation and Operation Manual
Communications Frequency Setpoint #1
Program Communications Settings Communications Speed
Setpoint #1
This parameter is used to set the gain and bias of the Communications
Reference speed control input.
See Communications Reference Setpoint #1 for further information on this
setting.
This parameter sets Communications Speed #1.
Changes made to this parameter require that the power be cycled (Off then On)
for the changes to take effect.
Parameter Type — Numerical
Factory Default — 0.00
Changeable During Run — Yes
Minimum — 0.00
Maximum — Max. Freq.
Units — Hz
Communications Frequency Setpoint #2
Program Communications Settings Communications Speed
Setpoint #2
This parameter is used to set the gain and bias of the Communications
Reference speed control input.
See Communications Reference Setpoint #1 for further information on this
setting.
This parameter sets the Communications Speed #2.
Changes made to this parameter require that the power be cycled (Off then On)
for the changes to take effect.
Parameter Type — Numerical
Factory Default — 80.0
Changeable During Run — Yes
Minimum — 0.0
Maximum — Max. Freq.
Units — Hz
Cooling Fan Control
Program Protection Settings Cooling Fan Control
This parameter sets the cooling fan run-time command.
Settings:
Automatic
Always On
Parameter Type — Selection List
Factory Default — Automatic
Changeable During Run — Yes
Continuing Stall Period
Program Protection Settings Continuing Stall Period
This setting allows the user to extend the Overvoltage Stall and the
Overcurrent Stall time settings.
Parameter Type — Numerical
Factory Default — 0.00
Changeable During Run — No
Minimum — 0.00
Maximum — 1.00
Units — Seconds
CPU Revision
Program Utilities Version CPU Revision Level
This is a read-only parameter that displays the revision level of the CPU.
CPU Version
Program Utilities Version CPU Revision Level
This is a read-only parameter that displays the version level of the CPU.
Communications Frequency Setpoint #1 CPU Version