Filter
Top Products
W7 ASD Installation and Operation Manual 35
Program Menu Navigation
Table 4 lists the menu items of the Program mode and maps the flow of the menu selections. The
Parameter Numbers for the listed functions are provided where applicable. The functions listed may be
accessed (and changed) as mapped below or via the Direct Access method: Program
Direct Access
Applicable Parameter Number.
Table 4. Program mode mapping.
Program Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number
FUNDAMENTAL
PARAMETERS
Fundamental #1
Maximum Output Frequency 0011
#1 Base Frequency 0014
Supply Voltage Compensation 0307
Maximum Output Voltage #1 0306
Disable Forward/Reverse Run 0311
Upper Limit Frequency 0012
Lower Limit Frequency 0013
V/f Pattern 0015
Torque Boost #1 0016
Acceleration Time #1 0009
Deceleration Time #1 0010
Acceleration/Deceleration Pattern #1 0502
S-Pattern Lower Limit Adjustment 0506
S-Pattern Upper Limit Adjustment 0507
Fundamental #2
Base Frequency #2 0170
Maximum Voltage #2 0171
Torque Boost #2 0172
Thermal Protection #2 0173
Acceleration Time #2 0500
Deceleration Time #2 0501
Acceleration/Deceleration Pattern #2 0503
Acceleration/Deceleration #1/#2 Switching
Frequency
0505
SYSTEM INFORMATION
AND SETUP
Setup
Acceleration Time #1 0009
Deceleration Time #1 0010
Upper Limit Frequency 0012
Lower Limit Frequency 0013
VI/II Speed Reference Setpoint #1 0201
VI/II Speed Frequency Setpoint #1 0202
VI/II Speed Reference Setpoint #2 0203
VI/II Speed Frequency Setpoint #2 0204
Type Reset 0007
V/f Pattern 0015