Filter
Top Products
34 W7 ASD Installation and Operation Manual
PID Feedback — Displays the instantaneous PID feedback value.
Post Compensation Frequency — Displays the output frequency of the ASD after the application of
the waveform adjustment compensation for changes in the input voltage.
Run Time — Displays the accumulated run-time since the last reset or power up of the ASD.
Output Terminals — Shows the active discrete output terminals.
Input Terminals — Shows the active discrete input terminals.
Output Voltage — Shows the instantaneous output voltage as a percentage of the rating of the ASD
or as a voltage (see
Units for Voltage and Current on pg. 133).
DC Voltage — Shows the instantaneous DC bus voltage as a percentage of the rating of the ASD or
as a voltage (see
Units for Voltage and Current on pg. 133).
Output Current — Shows the instantaneous output current as a percentage of the rating of the ASD
or as a current (see
Units for Voltage and Current on pg. 133).
Frequency Command — Displays the current frequency command.
Program Screen
The Program Menu allows the user access to parameters that setup the input and output specifications
of the W7 ASD. Many of these settings are application-specific and will require setup. The Setup
screen provides easy-access to the most common setup parameters. See the section titled
Program Menu
Navigation on pg. 35 for a complete listing of the W7 ASD parameters and for menu navigation
assistance.