Filter
Top Products
Safety
viii 975-0200-01-01
Standard Warnings
1. Before installing and using the XTR 850 Watt or XTR 1700 Watt
Series Programmable DC Power Supply, read all instructions and
cautionary markings on the XTR and all appropriate sections of this
Manual.
2. The XTR is for indoor use only. Do not expose the XTR to moisture.
To reduce risk of fire hazard, do not cover or obstruct the ventilation
openings. Be sure to install the XTR in a compartment which allows
air to reach the ventilation inlets on the front and rear of the unit to
prevent overheating. For more information, see
“Ventilation” on
page 2–4.
3. To avoid a risk of fire and electric shock, make sure that the existing
wiring is in good condition and the wire is not undersized. Do not
operate the XTR with damaged or substandard wiring.
4. Do not operate the XTR if it has received a sharp blow, been dropped,
or otherwise damaged in any way. If the XTR is damaged, see
“Warranty and Product Information” on page WA– 1.
5. Do not disassemble the XTR. It contains no user-serviceable parts.
See the
“Warranty and Product Information” on page WA– 1 for
instructions on obtaining service. Attempting to service the XTR
yourself may result in a risk of electrical shock or fire. Internal
capacitors remain charged after all power is disconnected.
6. To reduce the risk of electrical shock, disconnect AC power from the
XTR before attempting any maintenance or cleaning or working on
any circuits connected to the XTR. Turning off controls will not
reduce this risk.
WARNING
This chapter contains important safety and operating instructions. Read and keep
this Operating Manual for future reference.