Filter
Top Products
Analog Programming (APG) and Isolated Analog Programming (ISOL)
4-18 975-0200-01-01
4. Press the Rotary knob/Enter button to return to normal mode.
5. If the APG mode was modified in step 2, execute the procedure to
deactivate the APG voltage mode.
Quick Tip
Remote operation
uses these SCPI
commands. See
page 5–1.
The SCPI command (s) for these instructions are:
[:]SYSTem[<channel>]:REMote:SOURce:CURRent[:NISOlated]
[:]SYSTem[<channel>]:COMMunicate:APRogram:CURRent[:ISOla
ted]:LEVel
[:]MEASure[<channel>]:APRogram:CURRent[:SCALar][:DC]?
Voltage and Current Readback
The pin numbers are described in Table 4-3 on page 4–5.
Figure 4-8
Voltage Readback Using APG Connector J1
Figure 4-9
Current Readback Using APG Connector J1