Filter
Top Products
Installation
2-4 975-0200-01-01
Step 2: Location and Mounting
The power supply may be rack-mounted or used in benchtop applications.
Rack Mounting
The XTR 850 Watt power supply is designed to fill half of a standard
19
inch (483 mm) equipment rack. The XTR 1700 Watt is designed to fill
a standard 19
inch (483 mm) equipment rack.
Units can be combined with the same models in the 850 W or 1700 W
series for customer applications.
Purchasing Rack Mount Kits
Contact Xantrex Customer Service (see “Contact Information” on
page iii) about purchasing the Rack Mount Kit options for XTR 850 Watt
and XTR 1700 Watt. For a list of the part numbers, see “Part Numbers for
Rack Mount Kits” on page iii. Installation information for the different
rack mount options are provided with the rack mount kits.
For XTR product support, visit www.xantrex.com and navigate to the
XTR home page.
Ventilation
Whether operating the power supply in a rack or on a bench, allow air to
reach the ventilation inlets on the front and rear of the unit for cooling.
The direction of airflow is from the front of the unit to the back of the
unit. Ventilation space is not required at the top, bottom or sides of the
power supply.