Filter
Top Products
DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
E-4 XEROX DOCUPRINT 4850/4890 IPS INSTALLATION PLANNING GUIDE
Following is an example of the JES2 Initialization Dataset
required commands:
Configuring in JES3 Follow these steps to configure the PSF printer in JES3:
1. Locate the JES3 initialization dataset (commonly known as
Initialization Deck) in the JES3 catalogued JCL Procedure.
(This is normally kept in SYS1.PROCLIB, although your system
may use a different library.)
The JES3 PROC has a JES3IN DD statement, which points to
the initialization dataset. The default initialization deck is in
SYS1.SAMPLIB (member JES3IN00); however, you should
verify your location by looking at the JES3 procedure.
2. Enter the following required commands in the JES3 initialization
deck to define the PSF functional subsystem (FSS):
MARK NO Installation
preferences
YES or NO YES specifies for IPS
that there is either
offsetting or stitching of
jobs, subject to value of
COPYMARK parameter
and setting on IPS.
MODE FSS (if FSS=
is coded)
Must be FSS FSS MODE=FSS should be
specified.
PRESELECT YES Installation
preferences
YES or NO Specifies whether
output datasets are
preselected for this
FSA.
ROUTECDE None Installation printer
name standards
1 to 4 destination
names
If WS if F, only output
with these destinations
is selected for this
printer.
START YES Should be NO for
TCP/IP printers.
YES or NO START=NO should be
specified so TCP/IP can
be started before the
FSS.
TRKCELL no See JES2
SPOOLDEF
statement
YES or NO IBM recommends YES.
WS None Installation
preferences
See JES2
Initialization and
Tuning Manual.
Consider CL, R, and F.
See JES2 Initialization
and Tuning Manual for
more information.
Table E-1. JES2 FSS statement parameters (continued)
Item
description Default Source of value
Range of
acceptable
values Comments Your value
Table E-2. JES2 Initialization Dataset commands example
FSS (FSS1) PROC=FSSPROC1,HASPFSSM=HASPFSSM,AUTOSTOP=YES
PRT0001 CLASS=E,FSS=FSS1,MODE=FSS,PRESELCT=YES,
START-NO,TRKCELL=YES,WS=(Q)