Filter
Top Products
DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
E-10 XEROX DOCUPRINT 4850/4890 IPS INSTALLATION PLANNING GUIDE
Note: To specify a TCP/IP address space name other than the
default (TCP/IP), code the following EXEC statement in the
appropriate PSF writer procedure:
STEP01 EXEC PGM=APSPPIEP,
PARM=(,,,,tcpip_name), REGION=4096K
where tcp/ip_name is the name of the TCP/IP address space.
If this parameter is not coded, PSF uses the default name,
TCPIP. (For a full description of the PARM parameter, refer to
Print Services Facility/MVS: Diagnosis Guide and
Reference.)
TIMEOUT Installation
preferences
REDRIVE or STOP REDRIVE: When there is a
time-out after period
specified in DISCINTV
parameter, REDRIVE
requests that PSF attempt
to drive the printer
according to MGMTMODE
specification.
STOP: Forces operator to
restart FSA.
Note: REDRIVE is
recommended for TCP/IP
printers that may be shared
with other hosts.
TRACE NO YES or NO Should be used only for
debugging PSF-related
problems.
Table E-5. PSF/MVS PRINTDEV statement parameters
(continued)
Item
description Default
Source of
value
Range of
acceptable values Comments Your value