Filter
Top Products
PRINTER SPECIFICATIONS AND REQUIREMENTS
6-10 XEROX DOCUPRINT 4850/4890 IPS INSTALLATION PLANNING GUIDE
CCU changeout cart
The changeout cart is required for installing and removing the CCU,
which contains the colored dry ink. A cart must also be used to store
any CCUs that are not currently installed in the printer. Therefore, if
you intend to print using more than one dry ink color, you should have
one cart for each CCU.
Note: If there is more than one printer at your site, it may not be
necessary to have one cart per CCU. Consult with your site
representative for more information.
Empty carts may be stored anywhere in your site that is convenient
and provides easy access when the carts are required for a
changeout. Carts with a CCU loaded (a CCU being stored on the
cart) should be stored in a controlled environment, preferably in the
same controlled environment as the printer. This reduces the amount
of time required for the printer to set up the color developer housing
(inside the CCU) once it is installed and therefore reduces the
amount of total time required for a change of dry ink color.
You should plan for the space necessary to store the carts. For
example, the space in the controlled environment for loaded carts
and other space for empty carts.
The dimensions of the cart are as follows:
Note: Additional space (6-inch by 64-inch / 15 cm by 163 cm) is
required in front of the printer for CCU changeout cart
operability.
Dimension Specifications
Width:
Depth:
Height:
Weight:
16.1 inches / 409 mm
29.1 inches / 739 mm
36.9 inches / 937 mm
130 pounds / 59 kg (with CCU loaded).