Filter
Top Products
PRINTER SPECIFICATIONS AND REQUIREMENTS
6-18 XEROX DOCUPRINT 4850/4890 IPS INSTALLATION PLANNING GUIDE
Printer hardware specifications and requirements summary
The following table summarizes the specifications and electrical
requirements of your printer hardware components.
For a summary of controller specifications and requirements, refer to
the “Controller specifications and requirements” chapter of this guide.
Contact your service representative if you have questions not
specifically addressed in this guide.
Table 6-10. Printer specifications and power requirements
Device
Dimensions (depth,
width, height)
Total
Weight Heat dissipation Power requirements
4850/4890 printer with
standard (two-tray)
feeder and dual stacker
d=35.7 in. / 91 cm
w=91.8 in. / 233 cm
h=41 in. / 104 cm
Total space
required:
164 by 106.5 in. /
417 by 271 cm
1,454 lbs. /
661 kg
4850 (60 Hz) and
4850 (50 Hz DELTA):
Operating: 11,200 BTU
per hour
Standby: 7,400 BTU
per hour
4890 (60 Hz) and
4890 (50 Hz DELTA):
Operating: 14,980 BTU
per hour
Standby: 9,100 BTU
per hour
4850 (60 Hz):
120/208 VAC or
120/240 VAC
30 amp
Operating: 4.1 KVA
max.
Standby: 2.7 KVA max.
NEMA 14-30R
4850 (50 Hz DELTA):
200, 230, 240 VAC
(3-phase, 4 wire, or
single-phase)
30 amp
Operating: 3.8 KVA
max.
Standby: 2.5 KVA max.
4890 (60 Hz) and
4890 (50 Hz DELTA):
Operating: 5.5 KVA
max.
4850/4890 printer with
standard (two-tray)
feeder and stitcher/
stacker
d=35.7 in. / 91 cm
w=89.5 in. / 227 cm
h=41 in. / 104 cm
Total space
required:
162 by 106.5 in. /
411 by 271 cm
1,473 lbs. /
670 kg
Same as standard (two-
tray) feeder and dual
stacker configuration,
above.
Same as standard (two-
tray) feeder and dual
stacker configuration,
above.