Xerox 4890 IPS Printer User Manual


 
DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
XEROX DOCUPRINT 4850/4890 IPS INSTALLATION PLANNING GUIDE E-23
If the ping is successful:
Note: A successful ping usually indicates that the AS/400 system
can communicate with the IPS. However, you could receive a
successful ping even if the IP address of the TCP/IP-attached printer
is a duplicate of another IP address.
If PSF output for this printer prints elsewhere, follow these steps
to determine whether the IP address of the printer is unique:
1. Power off the printer.
2. Wait at least five minutes for TCP/IP to clear the Address
Resolution Protocol (ARP) tables.
3. Enter the ping command again at the AS/400 system.
4. If you receive a successful response to the ping command this
time, there is a duplicate IP address. Consult your network
administrator.
If the ping is unsuccessful:
If your ping is not successful, verify the following:
The printer is powered on.
TCP/IP has been started on the AS/400 (command: STRTCP).
The cables are properly connected between the printer and the
LAN.
The Network Interface Card (NIC) in the printer is functioning
properly. (Consult your Xerox service representative.)
Table E-18. Example of a successful ping AS/400
ping 9.9.999.999
Verifying connection to host system LOOPBACK at address 9.9.999.999.
Connection verification 1 took .000 seconds. 1 successful connection
verifications.
Connection verification 2 took .000 seconds. 2 successful connection
verifications.
Connection verification 3 took .001 seconds. 3 successful connection
verifications.
Connection verification 4 took .000 seconds. 4 successful connection
verifications.
Connection verification 5 took .000 seconds. 5 successful connection
verifications.
Round-trip (in milliseconds) min/avg/max = 0/0/1
Connection verification statistics: 5 of 5 successful (100 %).
Table E-19. Example of an unsuccessful ping AS/400
ping 9.9.999.999
Verifying connection to host system TEST at address 9.9.999.999.
No response from host within 10 seconds for connection verification 1.
No response from host within 10 seconds for connection verification 2.
No response from host within 10 seconds for connection verification 3
No response from host within 10 seconds for connection verification 4.
No response from host within 10 seconds for connection verification 5.
Connection verification statistics: 0 of 5 successful (0 %).