Filter
Top Products
DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
E-22 XEROX DOCUPRINT 4850/4890 IPS INSTALLATION PLANNING GUIDE
4. Test the printer connection – AS/400
Test the printer by one of the following methods to ensure AS/400 is
able to make a connection with the IPS printer:
• Send a job from the host through PSF to print on the IPS. (Refer
to your IPS Guide to Configuring and Managing the System for
printing procedures.)
• Ping the printer from your AS/400 system to ensure the AS/400
can establish a connection with the TCP/IP-attached IPS.
Pinging the printer To ping the printer to verify a connection can be made, enter the
following command on an OS/400 command line:
PING ‘Remote Location’
‘remote location’ specifies the internet protocol (IP) address of the
IPS printer (refer to the configuration worksheet, earlier in this
section).
Table E-17. Create Device Description (Printer) screen for
OS/400 with V3R2 installed
CREATE DEVICE DESC (PRINTER) (CRTDEVPRT)
Type choices, press Enter.
DEVICE DESCRIPTION......... > XEROXIPS *
DEVICE CLASS............... > *RMT
DEVICE TYPE................ > *IPDS
DEVICE MODEL............... > 0
ADVANCED FUNCTION PRINTING.. *YES
AFP ATTACHMENT............. > *APPC
MESSAGE QUEUE............... QSYSOPE
LIBRARY.................. *LIBL
MAXIMUM PENDING REQUESTS... 6
PRINT WHILE CONVERTING..... *YES
PRINT REQUEST TIMER........ *NOMAX
FORM DEFINITION............ F1C10110
LIBRARY.................. *LIBL
REMOTE LOCATION............ XEROXIPS * Same as DEVICE
LOCAL LOCATION............. *NETATR DESCRIPTION
REMOTE NETWORK IDENTIFIER... *NETATR
MODE...................... *NONE
TEXT ‘DESCRIPTION’......... *BLANK