Filter
Top Products
XEROX DOCUPRINT 4850/4890 IPS INSTALLATION PLANNING GUIDE 4-1
4. 4Preparing for installation
This chapter assists you in preparing for the installation of your Xerox
DocuPrint 4850 and 4890 IPS.
Preparing for installation is a responsibility shared by personnel at
your site and Xerox. Your service representatives are available to
discuss installation issues and to assist you in completing the site
installation tasks.
Prior to installation, you must select and prepare an appropriate
location for the DocuPrint system and order supplies. This chapter
helps you accomplish these tasks by providing the following
information:
• A summary of your responsibilities and those of your Xerox
service representative
• Connectivity requirements for setting up the IPS to receive data
from the IBM host
• A checklist of installation planning activities.
For information on controller power and space requirements, refer to
the “Controller specifications and requirements” chapter of this guide.
For facts about printer power and space requirements, refer to the
“Printer specifications and requirements” chapter of this guide.
Responsibilities
This section describes your site responsibilities and the
responsibilities of your service representatives. Included are some
joint responsibilities.
Xerox responsibilities
This section lists the responsibilities of the service representatives
and system analysts prior to, during, and after installation:
• Site selection
— Assist in site selection
— Inspect and approve the site.
• Installation
— Schedule the delivery of the hardware
— Monitor installation activities
— Assist you in ordering any supplies required
— Configure system parameters