Filter
Top Products
1 Safety Instructions
8265/8290/8365/8390 User Guide 3
• Be careful not to pinch your fingers when opening and closing the cover of the ink compartment.
• Be careful not to pinch your fingers when opening and closing the front cover.
• Follow the instructions below when connecting the network interface cable. Otherwise, electrical
shock or fire may occur.
{ Do not touch the connector.
{ Do not connect the network cable connector which has not the same specifications as the
interface board.
• When cutting the roll media, be careful of the following. Incorrect handling can result in injury to the
hands and fingers from the razor blade.
{ When holding the media, do not place fingers over the media cut groove.
{ Move the razor blade slowly along the media cutting groove.
• Do not use thinner, benzene, alcohol or other active agents. Doing so may result in damage or paint
peeling from the casing.
• Be careful not to spill water inside the printer. Doing so may result in a short circuit.
• Be careful not to touch the heaters during or after operation. Doing so may result in burns.
• Only use Xeror Ink and appropriate cleaning liquid.
• Never open the covers fixed with screws, except the left cover. Doing so may result in electrical
shock or a malfunctioning of the printer.
• Do not touch the cutter blade. Doing so may result in bodily injury.
• Do not cut hard objects or drop the cutter. Doing so may damage or chip the cutter blade.
• Do not bend or pull the waste fluid tube. Doing so may cause that the waste fluid will leak out and
malfunction of the product.
• Do not touch the cleaning wiper or the head cap unit with bare hands. Use a dust free cloth and
gloves to clean.
• Do not tilt the printer, stand it against a wall or turn it upside down. Doing so may cause ink to leak
inside the printer. Movement after transport is also not covered by the warranty.
• The equipment that you bought requires the extraction and use of natural resources for its production.
It may content hazardous substances for the health and the environment. In order to avoid the
dissemination of those substances in our environment and to diminish the pressure on the natural
resources, we encourage you to use the appropriate take-back system. Those systems will re-use or
recycle most of the materials of your end life equipment in a sound way. If you need more
information on the collection, re-use and recycling systems, please contact your local or regional
waste administration.