Filter
Top Products
4 Printer Operation
88 8265/8290/8365/8390 User Guide
4.5 CONTROL PANEL DURING PRINTING
When sending a file to your printer, following messages can be displayed.
4.5.1 Heaters are not Ready during Printing
When the heaters are not reached their target temperature, the following screen will be displayed.
Still, it is possible to start the print. However, the heater will continue to warm up in order to reach the
requested temperature.
Step 1 : Press the F3 key to ENTER the HeaterStatus menu.
Step 2 : Go to submenu 2/2 and press the F2 key to start the print.
4.5.2 Heaters are Ready during Printing
When heaters are ready, the printer will start printing.
While printing, some actions can be taken.
1) On the fly step adjustments.
In case of overlapped printing images or white lines on printing image, the step should be adjusted.
(+) Increase in case of overlap
(-) Decrease in case of white lines between swats
Wait Heating
Dist.Adj. Cleaning
A: HB: HC: HD:H
Heater Warming up
Wait Heating
Dist.Adj. Cleaning
A: HB: HC: HD:H
Heater Warming up