Filter
Top Products
4 Printer Operation
40 8265/8290/8365/8390 User Guide
Notes
The Network Settings menu is displayed if the network interface board has been installed on the product.
The items on the File Management menu are displayed if a hard disk has been installed in the product.
Setup items Parameters Description
InkStatus
Displays the information (ink status) for each ink cassette
installed in the ink cassette slot.
OriginSet Sets the printing start position (origin) for printing data.
TestPrint Performs test printing.
SetupMenu (1/7)
MediaSet Makes various media settings.
Print mode setting Makes various print mode settings.
Command setting Makes various printer command settings.
Layout setting Makes various layout function settings.
SetupMenu (2/7)
Function setting Makes various processing printing data settings.
Roll setting Makes various roll media settings.
Centronics setting Sets Centronics Interface communication mode.
SetupMenu (3/7)
Network setting Makes the settings for the network interface.
Utility setting Makes various advanced function settings.
File management
setting
Makes various settings for the processing method of the
printing data sent from computer to the installed hard disk in
the printer.
SetupMenu (4/7)
Initialize setting Returns the parameters to factory default value.
Data dump For Authorized Xerox Service Technicians only
SetupMenu (5/7)
Ink Manager
Manages the ink configuration, smart chip management
system and other ink related settings.
Head Unlock The cutting blade is replaced.
Wiper clean Clean the wiper.
Tank change Tank is replaced.
SetupMenu (6/7)
Tubing Flush Makes various tubing flush settings
SetupMenu (7/7) Version Check Ability to view the installed firmware version.
SetupMenu (1/7-7/7) -
[CANCEL] key: Cancel the setup menu, and shift to the
normal condition.
Notes
By using the software server RIP (option), some setups for printing can be set by the RIP. For details, refer
to the operation manual of the products.