Filter
Top Products
8265/8290/8365/8390 User Guide 105
6 MAINTENANCE
6.1 INTRODUCTION
This chapter explains the necessary daily, weekly and monthly maintenance of the printer. Be sure to
perform the recommended maintenance strictly. If not, Xerox does not guarantee constant printing quality.
6.2 8265/8290 PERIODIC MAINTENANCE
This section describes the periodic maintenance required for this machine. This maintenance helps
ensure stable image quality. In the periodic maintenance, some service parts may be checked, cleaned,
or replaced. Perform periodical inspections according to the table below.
Maintenance cycles
No° Action Frequency
1 Cleaning the edges of the caps and the area around the caps Weekly
2 Cleaning around the bottom of the heads Weekly
3 Cleaning the wipers Bi-weekly
4 Replacing the wipers Monthly
5 Replacing the sponge in the spitting box Monthly
6 Change the upper sponge at the back of the capping station Semi-Annual
Notes
• All cleaning in “Ink areas” must be done with Xerox 8265/8290 cleaning solution.
• Above maintenance cycle is based on use:
8 hours / day, 5 days / week and 44 weeks / year.
If machine is used more, maintenance periods will come earlier.
Available kits for the end user and their order numbers
1. User and good shape kit for 6 months
No Description Quantity
1
Sponge plate 6
2
Wipers 24
3
Spitting box sponge 12
4
Cleaning Liquid 250 ml 3
5
Instruction sheet 1
6
Good shape kit 1
2. Good shape kit
No Description Quantity
1
Gloves 300
2
Pipette 12
3
Swabs 150
4
Polyknit wiper 300
3. Long store kit