Filter
Top Products
6 Maintenance
8265/8290/8365/8390 User Guide 129
Caution
Be sure not to pinch your fingers while opening and closing the front cover.
Step 2 : Refer to "TestPrinting" to perform nozzle check printing.
Step 3 : Check if the print head, referring to the diagram below.
Step 4 : Check the printer is in the normal status.
Step 5 : Press the [F2] key on the operation panel.
I) The printer enters the cleaning menu.
Step 6 : Press the [F2] key on the operation panel to change the parameters.
Key Parameter Description
Small Small cleaning is performed.
Normal Normal cleaning is performed.
F2
Strong Strong cleaning is performed.
Step 7 : Press the [ENTER] key on the operation panel to start the head cleaning.
Notes
If the [Cancel] key has been pressed instead of the [ENTER] key after changing the parameters, the printer
returns to the normal status without performing a head cleaning.