Filter
Top Products
3 Printer Setup
8265/8290/8365/8390 User Guide 29
Step 3 : Press the [Enter] key on the operation panel.
¾ The media type has been set.
¾ "Media Initial" is displayed on the LCD, and the printer starts the media initial operation.
Notes
• The printer starts the media initial operation if you :
o Press the [CANCEL] key on the operation panel
o Leave the printer for 10 seconds without doing anything
Step 4 : When the media initial operation finishes, the printer moves to normal status.
¾ The setting media loading procedure has been completed.
3.5 TEST PRINTING
Follow the steps below to do a test print and confirm if your printer operates correctly.
Step 1 : Turn the power of the unit ON and load the media.
Step 2 : Make sure that your printer is in normal status.
Step 3 : Press either the [MENU ↑] key or [MENU ↓] key on the operation panel.
¾ The setup menu is displayed.
Step 4 : Press the [F3] key on the operation panel.
¾ "TestPrint: SetupPrint" is displayed on the LCD.