Filter
Top Products
3 Printer Setup
8265/8290/8365/8390 User Guide 23
3.4 MEDIA HANDLING
Media handling, attaching media, and setting media type are explained below.
3.4.1 Loading Sheet Media
You can use the following sheet media with your printer.
Maximum Media Width
2280 mm
Printing Width Up To
2250 mm
To load sheet media, follow the steps below.
Notes
If roll media is attached to the printer, wind the media up and then load the sheet media.
Step 1 : Turn the printer on.
Step 2 : The printer starts the initialize operation.
¾ The following message is displayed on the operation panel.
Notes
If you do not want to use the media detection at the media initialization: Set to "OFF" in the media
detection setup item.
Step 3 : Verify if the sheet lamp on the operation panel is unlit.
Step 4 : Press the [F4] key on the operation panel to lower the pressure rollers.
¾ The MEDIA SET lamp will light (orange).
¾ The following message is displayed on the operation panel.