Filter
Top Products
Specifying input parameters
Using LCDS Print Description Language 2-31
The following sections describe the syntax of the command
parameters and explain their options.
PCC ADVTAPE
Specifies whether or not the carriage control advances to a new
page when two successive channel skip parameters are issued
with no intervening print.
For example, on most printers, the actions PSK1 (Print and Skip
to Channel 1) followed by SK1N (Skip to Channel 1, Do Not
Print) cause a blank page to be output. However, on a 1403
printer, these actions do not produce a blank page.
Syntax [ac:] PCC ADVTAPE = {YES | NO}
Options
Default No default
PCC ADVTAPE
parameter: point
to note
SK1P (skip to channel 1 and print) followed by a second SK1P
results in a page transition because printing occurred on the first
page, even if only blanks were output.
PCC ASSIGN
Specifies printer carriage control exceptions to a default table.
Refer to the “PCC DEFAULT” parameter section in this chapter.
LTHFLD Length of field containing record length Y N N
OFFSET Location of record length field Y N N
POSTAMBLE Length of extraneous data at end of record Y N N
STRUCTURE Input record structure Y N N
Table 2-31. Summary of PCC command parameters (Continued)
Parameter Specifies Online Offline DJDE
Table 2-32. PCC ADVTAPE parameter options and definitions
Option Definition
YES Specifies that multiple skips are honored.
NO Specifies that multiple skips result in only one skip action being taken.