Filter
Top Products
Specifying print format parameters
4-54 Using LCDS Print Description Language
Options
Default NO
OUTPUT FACEUP
parameter: point
to note
Specify FACEUP=YES when printing on label stock. Delivering
label sheets face up prevents delamination when the sheets are
stacked. Refer to the “OUTPUT NTO1” parameter section later
in this chapter for related information.
OUTPUT FEED
Controls the initial stock on which pages are printed.
Syntax OUTPUT FEED = {OPR | MAIN | AUX | ‘stockname’ |
stockreference}
Options
Default OPR
Table 4-52. OUTPUT FACEUP parameter options and
definitions
Option Definition
YES Specifies that the printed sheets are delivered to the stacker
face up.
NO Specifies that the printed sheets are delivered to the stacker
face down.
Table 4-53. OUTPUT FEED parameter options and definitions
Option Definition
MAIN Feeds from the tray for which the stock identified as MAIN was specified.
(Provides compatibility with existing applications.)
AUX Feeds from the tray for which the stock identified as AUX was specified.
(Provides compatibility with existing applications.)
OPR FEED =OPR is equivalent to FEED = MAIN. (Provides compatibility with
existing applications.)
‘stockname’ Specifies the name of the stock from whose assigned tray or trays the next
sheet will feed for printing. This name must be in single quotes.
stockreference Specifies the descriptive term that has been associated with the name of
the stock being used for the job.