Filter
Top Products
Specifying print format parameters
Using LCDS Print Description Language 4-111
Options
Default No default
VFU BOF
Specifies the Bottom Of Form line number.
Syntax [ac:] VFU BOF = value
Options
Default 66
VFU BOF
parameter: point
to note
If the carriage control action specified by the PCC ASSIGN
parameter for BOF is specified as OVR (the default), the
processing spaces from Top of Form a number of lines equal to
the difference between the location of the current line and the
new BOF (if it is different from the original BOF).
VFU TOF
Specifies the Top Of Form line number.
Syntax [ac:] VFU TOF = value
Table 4-95. VFU ASSIGN parameter options and definitions
Option Definition
channo channel number.
The number of the channel being assigned. It is an integer in the range 0 to 15.
lineno line number.
The number of the output print line that you are assigning to a particular
channel. It is an integer in the range TOF to BOF.
Table 4-96. VFU BOF parameter options and definitions
Option Definition
value Specifies the number of lines from the top of the output page to the last print
line on the page (bottom of form). The Bottom Of Form specification is
independent of channel assignments. BOF should be greater than or equal to
the largest line number assigned to a channel.
The maximum value for BOF is 255.