Filter
Top Products
Specifying input parameters
Using LCDS Print Description Language 2-65
Options
Default NO
VOLUME MAXLAB
Specifies the longest physical block that will be treated as a label
when an undefined label is specified (LABEL=UNDEF).
Syntax VOLUME MAXLAB = value
Options
Default 81
VOLUME MAXLAB
parameter: point
to note
Any data block whose length is between MINLAB and MAXLAB
(inclusive) is treated as a label.
VOLUME MINLAB
Specifies the smallest physical block that will be treated as a
label when an undefined label is specified (LABEL=UNDEF).
Syntax VOLUME MINLAB = value
Table 2-69. VOLUME LPACK parameter options and definitions
Option Definition
NO Indicates that no unpacking operation will be performed.
YES Indicates that the labels are packed.
If YES is specified, the UNPACK parameters specify the required unpacking
method for both the labels and the input data. If the data in a report is packed,
the labels may be either packed or unpacked.
Table 2-70. MAXLAB parameter options and definitions
Option Definition
value Specifies in bytes the maximum length of the longest physical block. The value
can range from 2 to 4096 bytes. The specified value must be greater than the
MINLAB value and must not exceed the BLOCK LENGTH.