Filter
Top Products
Using Dynamic Job Descriptor Entries (DJDEs)
Using LCDS Print Description Language 5-31
Records with a length greater than 80 bytes are truncated to
80 bytes; records with a length less than 80 bytes are padded
with ASCII blanks to 80 bytes. Character translation may be
performed, depending on the JDE in effect.
4. The system terminates record processing for the card image
being downloaded when another DJDE record is
encountered.
• If a DJDE record is encountered and one or more card
image records have been written in the file, the file is
truncated to an appropriate size and closed. If
OPRINFO=YES, a message is listed on an OPRINFO
page, indicating that a file has been created and giving
the name of the new file.
• If a DJDE record is encountered before any card image
records have been filed, the null file is deleted, and the
preceding DJDE packet is printed on an OPRINFO page
with an error message indicating that the file “FILENAME”
has no card image data.
5. The printing system completes file processing.
NOTE: Card image files that have the type extensions listed
below are not supported on the DP 2000 Series EPS:
•.CMD
•.MSC
•.PCH
•.TMP
•.TPF
When the system encounters any of these types of files specified
within a FILE DJDE, it logs an “invalid file type” error, which is
handled according to the specification by the ABNORMAL
ERROR parameter in the JDL.
LPS labeled file
processing
When LPS labeled files are transferred, the following occurs:
1. The system checks the FILE DJDE for valid parameters,
reads the LPS label record at the beginning of the file, and
responds to errors as follows: