Filter
Top Products
Specifying print format parameters
Using LCDS Print Description Language 4-53
Options
Default BIN
OUTPUT DUPLEX
Specifies whether printing is to occur in duplex (print on both
sides of a sheet) or simplex (print on a single side).
Syntax OUTPUT DUPLEX = {YES | NO}
Options
Default NO
OUTPUT DUPLEX
parameter: point
to note
Transparencies cannot print in duplex.
OUTPUT FACEUP
Specifies that printed pages are delivered face up to the output
destination.
Syntax OUTPUT FACEUP = {YES | NO}
Table 4-50. OUTPUT DESTINATION parameter options and definitions
Option Definition
BIN Specifies that the currently selected bin is used.
TRAY Sends output to the sample tray.
Transparencies should always be sent to this tray.
NOTE: Use caution when selecting the TRAY option because of the limited
capacity of the sample tray (100 sheets).
EXPORT Specifies that sheets be sent to the bypass transport to be fed into a finishing
device. The EXPORT option takes effect only if:
• The user interface Output window has “System Specified” selected in the
Output Location field, and
• The Finishing field displays the name of a finishing device.
Table 4-51. OUTPUT DUPLEX parameter options and definitions
Option Definition
YES Specifies two sided (duplex) printing.
NO Specifies single sided (simplex) printing.