Filter
Top Products
Using logical processing
3-50 Using LCDS Print Description Language
Options
Default NEXT
RSUSPEND and RRESUME TEST
Defines the test expressions for the record at which printing will
be suppressed (RSUSPEND) or resumed (RRESUME).
Syntax RSUSPEND TEST = testexp
RRESUME TEST = testexp
Options
Default No default
RRESUME and RSUSPEND commands: points to note
• On the FreeFlow Print Server LCDS system, RSUSPEND
and RRESUME are supported only for offline printing.
Table 3-37. RSUSPEND and RRESUME BEGIN parameter options and
definitions
Option Definition
CURRENT Specifies that printing will stop or resume on the current record.
• If CURRENT is coded for RSUSPEND, the record satisfying testexp does
not print.
• If CURRENT is coded for RRESUME, the record is printed.
NEXT Specifies that printing will stop or resume with the next record.
• If NEXT is coded for RSUSPEND, the record satisfying testexp is printed,
and printing is suppressed beginning with the next record.
• If NEXT is coded for RRESUME, the record satisfying the testexp is not
printed, and printing begins with the next record.
Table 3-38. RSUSPEND and RRESUME TEST parameter options and
definitions
Options Definitions
testexp test expression.
Defines a test expression for the record with which printing will be suspended
(RSUSPEND) or resumed (RRESUME) following print suppression.
Refer to “Coding a test expression” earlier in this chapter for the format and
syntax of a testexp.