Filter
Top Products
Specifying print format parameters
Using LCDS Print Description Language 4-57
OUTPUT FORMS
parameter: points
to note
• CYCLEFORMS and FORMS parameters: Both may be
used within a report; however, only the last parameter
specified is in effect at any given time. If a multicopy report
specifies CYCLEFORMS, a FORMS DJDE that is
encountered within the report overrides the CYCLEFORMS
parameter from that point in every copy.
• You can code forms at a workstation with forms creation
software such as Elixir, on another laser printing system
using Xerox Forms Description Language (FDL), or on a
mainframe computer.
You can transfer these form files from tape, CD, or diskette to
the print server disk by using the Import process. (For further
information, click the online [Help] button on your system
print server and refer to “Importing resources.”) You can also
download forms from a host computer by using File Transfer
Protocol (FTP) or the FILE DJDE.
OUTPUT FORMS
parameter
example
The example below shows how to specify forms on different
copies. Form FORM12 appears on copies 1 and 2. FORM3 will
print on copy 3, and FORM4, on copies 4 through 10.
OUTPUT GRAPHICS
Specifies how graphics will be processed in a job.
Syntax OUTPUT GRAPHICS = {NO | YES | MOVE | BATCH | ({NO |
YES | MOVE}, NOSUB)}
Options
OUTPUT FORMS = (FORM12,1,2), FORMS = FORM3,
FORMS = FORM4, COPIES = 10;
Table 4-56. OUTPUT GRAPHICS parameter options and definitions
Option Definition
NO Indicates that there are no graphics in this job.
YES Indicates there are graphics in the job, and they are processed in Batch mode.
BATCH Means that the input stream contains no text, but only graphics that are to be
imaged, one per page.