Filter
Top Products
Using Dynamic Job Descriptor Entries (DJDEs)
Using LCDS Print Description Language 5-9
•JDE
•JDL
• DUPLEX=NO
•FEED
Effect of multiple
logical pages
If you use multiple PDE BEGIN commands to define multiple
logical pages on one physical page (as described in the PDE
command description in the “Specifying print format parameters”
chapter), consider the following:
• With the exception of DEPT and SHIFT, all page oriented
DJDEs are applied at a logical page boundary.
• The following DJDEs cause the current page position to be
set to the first logical page of the front side of a new physical
sheet:
–DUPLEX
– COPIES
–JDL
–JDE
– OTEXT
– RTEXT
–FEED
• The following DJDEs cause the current page position to be
set to the first logical page of the next physical side:
–FORMS
–FORMAT
–BEGIN
–PMODE
–FONTS
Header pages and
online DJDEs
If an online job has header pages only (no trailers), DJDEs that
are invoked within a report remain in effect for the first header
page of the following report; however, they do not remain in
effect beyond the end of that header page. These conditions
occur because the end of the first report is not detected until the
first header page of the following report is received and
processed.