Filter
Top Products
Specifying print format parameters
4-108 Using LCDS Print Description Language
Default MAIN
STOCKSET
SYSPAGE
parameter: points
to note
• Paper size mismatch on system pages: Pages generated
by the system via such commands as IDEN OPRINFO are
formatted for 8.5 by 11 inch paper, unless the queue has
been configured for A4 paper. These system generated
pages are printed with the STOCKSET SYSPAGE parameter
that is in currently effect. If no STOCKSET parameters are in
effect, the MAIN stock is used, unless it overridden by a
specification entered on the user interface windows.
Example of mismatch handling:
Assume that you try to print this page on 8.5 by 11 inch
paper, subject to the stock that was identified by the
SYSPAGE parameter or the specification that was entered at
the print server screen.
– If the paper size is not available, the system attempts to
print the page on a different paper size chosen from the
set of trays that normally would be used. No warning,
caution, or cycling down occurs.
– If a larger paper size is available, it is used. If a larger
paper size is not available, a smaller paper size is used.
This is the only time a page may be printed on a paper
size smaller than what was specified to format the page.
When a system generated page is not printed on the size
paper that was used to format it, the positioning of the data
on the physical page is not guaranteed. For example, when
printing on a larger paper size, the data does not fall off the
physical page, but it may not appear in the correct location.
When printing on a smaller size paper, the data may fall off
the physical page and appear incomplete.
MAIN Specifies that system pages feed from the tray containing the stock identified
as MAIN.
AUX Specifies that system pages will feed from the tray containing the stock
identified as AUX.
Table 4-93. STOCKSET SYSPAGE parameter options and definitions
Option Definition