Filter
Top Products
x
SAFETY NOTES/REGULATORY INFORMATION
A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable
FCC Part 68 rules and requirements adopted by the ACTA. A FCC
compliant telephone cord and modular plug is provided with this
equipment.
You may safely connect the machine to the following standard
modular jack: USOC RJ-11C using the compliant telephone cord
(with modular plugs) provided with the installation kit. See
installation instructions for details.
To order the correct service from the Telephone Company please
quote the codes listed in the table: Facility Interface Code (FIC),
Service Order Code (SOC), USOC Jack Code and Ringer
Equivalence Number (REN)
WARNING: Ask your local telephone company for the
modular jack type installed on your line. Connecting this
machine to an unauthorized jack can damage telephone
company equipment. You not Xerox, assume all
responsibility and/or liability for any damage caused by the
connection of this machine to an unauthorized jack.
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone
line may result in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of the RENs
should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by the
total RENs, contact the local Telephone Company. The REN for
this product is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN
without a decimal point (e.g., 02 is a REN of 0.2)
FIC SOC USOC Jack REN
02LS2 9.0F RJ-11C 0.2