Filter
Top Products
4–11
USER GUIDE (MACHINE ADMINISTRATOR)
Non-Copy Job Complete
Tone
Sets the tone when a job other than copying has been completed
successfully. It can be set to:
•Off
•Soft
•Normal
• Loud
The default is Normal.
Fault Tone Sets the tone when a fault occurs and the job is held in a faulted
state. It can be set to:
•Off
•Soft
•Normal
• Loud
The default is Normal.
Alert Tone Sets the tone when a job finishes abnormally. It can be set to:
•Off
•Soft
•Normal
• Loud
The default is Off.
Low Toner Alert Tone Sets the tone when the Drum Cartridge or Toner Cartridge has to
be replaced. It can be set to:
•Off
•Soft
•Normal
• Loud
The default is Normal.