Filter
Top Products
Zebra 105SL User’s Guide 65
/ØÏlÍAÃlÍAcÍcØÆÏlÏ
&OHDQLQJ
Table 1 provides a brief cleaning schedule. Specific cleaning procedures
are provided on the following pages.
CAUTION: Use only the cleaning agents indicated. Zebra
Technologies Corporation is not responsible for any other
fluids being used on this printer.
Table 1
Area Method Interval
Printhead Solvent* Direct thermal print mode:
After every roll of media (or
500’/152 m of fanfold media).
Thermal transfer print mode: After
every roll of ribbon.
Platen roller Solvent*
Transmissive sensor Air blow
Black mark sensor Air blow
Media path Solvent*
Ribbon sensor Air blow
Label available sensors Air blow Monthly
Tear-off/peel-off bar Solvent*
As needed
Snap plate Solvent*
Cutter Solvent*
* Zebra recommends using a solvent containing 90% isopropyl alcohol.