Zebra 105SL User’s Guide 81
:DUQLQJ³+HDG&ROG
:DUQLQJ³&XWWHU-DPPHG
2XWRI0HPRU\
Problem Solution
The printhead is under temperature.
Continue printing while the printhead reaches the correct
operating temperature. If the error remains, the
environment may be too cold for proper printing. Relocate
the printer to a warmer area.
Printhead data cable is not properly
connected.
WARNING: The printhead can be very hot and can cause
severe burns. Allow the printhead to cool.
Disconnect and reconnect data cable to the printhead.
Ensure that the cable connector is fully inserted into the
printhead connector.
Problem Solution
Cutter blade is in the media path. Turn off the printer power and unplug the printer. Inspect
the cutter module for debris and clean as needed following
the cleaning instructions on page 74.
Problem Solution
*There is not enough memory to perform the
function shown on the second line of the
error message.
Insufficient memory for the label length, downloaded fonts/
graphics, and images.
Ensure that the device, such as FLASH memory or
PCMCIA card is installed and not write protected or full.
Ensure that the data is not directed to a device that is not
installed or available.