88 Zebra 105SL User’s Guide
FEED Key Self Test
See Figure 34.
1. Turn off the printer.
2. Press and hold the FEED key
while turning on the power.
The FEED Key Self Test prints
out at various darkness settings
above and below that of the
darkness value shown on the
configuration label. Examine
these labels and determine which
one has the best darkness setting
for your application. This value
can be entered into the printer by
setting the darkness during the
configuration procedure. Refer to
page 46 for more information.
The value printed on that label is
added to (plus) or subtracted from (minus) the darkness value specified on
the configuration label. The resulting numeric value (0 to 30) is the best
darkness value for that specific media/ribbon combination.
Figure 34