Filter
Top Products
Chapter 6 Monitor
ZyWALL 110/310/1100 Series User’s Guide
102
The Web Configurator saves the filter settings if you leave the View Log screen and return to it
later.
Email Log Now Click this button to send log message(s) to the Active e-mail address(es) specified
in the Send Log To field on the Log Settings page (see Section 38.3.2 on page
489).
Clear Log Click this button to clear the whole log, regardless of what is currently displayed on
the screen.
# This field is a sequential value, and it is not associated with a specific log message.
Time This field displays the time the log message was recorded.
Priority This field displays the priority of the log message. It has the same range of values
as the Priority field above.
Category This field displays the log that generated the log message. It is the same value used
in the Display and (other) Category fields.
Message This field displays the reason the log message was generated. The text “[count=x]”,
where x is a number, appears at the end of the Message field if log consolidation is
turned on (see Log Consolidation in Table 196 on page 490). and multiple entries
were aggregated to generate into this one.
Source This field displays the source IP address and the port number in the event that
generated the log message.
Destination This field displays the destination IP address and the port number of the event that
generated the log message.
Note This field displays any additional information about the log message.
Table 36 Monitor > Log (continued)
LABEL DESCRIPTION