Filter
Top Products
Chapter 20 IPSec VPN
ZyWALL 110/310/1100 Series User’s Guide
304
In the ZyWALL Quick Setup wizard, you can use the VPN Settings for Configuration
Provisioning wizard to create a VPN rule that will not violate these restrictions.
Figure 186 Configuration > VPN > IPSec VPN > Configuration Provisioning
Each field is discussed in the following table.
Table 113 Configuration > VPN > IPSec VPN > Configuration Provisioning
LABEL DESCRIPTION
Enable
Configuration
Provisioning
Select this for users to be able to retrieve VPN rule settings using the ZyWALL IPSec VPN
client.
Client
Authentication
Method
Choose how users should be authenticated. They can be authenticated using the local
database on the ZyWALL or an external authentication database such as LDAP, Active
Directory or RADIUS. default is a method you configured in Object > Auth Method. You
may configure multiple methods there. If you choose the local database on the ZyWALL,
then configure users using the Object > User/Group screen. If you choose LDAP, Active
Directory or RADIUS authentication servers, then configure users on the respective server.
Configuration When you add or edit a configuration provisioning entry, you are allowed to set the VPN
Connection and Allowed User fields.
Duplicate entries are not allowed. You cannot select the same VPN Connection and
Allowed User pair in a new entry if the same pair exists in a previous entry.
You can bind different rules to the same user, but the ZyWALL will only allow VPN rule
setting retrieval for the first match found.
Add Click Add to bind a configured VPN rule to a user or group. Only that user or group may
then retrieve the specified VPN rule settings.
If you click Add without selecting an entry in advance then the new entry appears as the
first entry. Entry order is important as the ZyWALL searches entries in the order listed here
to find a match. After a match is found, the ZyWALL stops searching. If you want to add an
entry as number three for example, then first select entry 2 and click Add. To reorder an
entry, use Move.
Edit Select an existing entry and click Edit to change its settings.
Remove To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove
it before doing so.
Activate To turn on an entry, select it and click Activate. Make sure that Enable Configuration
Provisioning is also selected.
Inactivate To turn off an entry, select it and click Inactivate.