Filter
Top Products
Chapter 36 DHCPv6
ZyWALL 110/310/1100 Series User’s Guide
441
The following table describes the labels in this screen.
Table 173 Configuration > DHCPv6 > Lease > Add
LABEL DESCRIPTION
Name Type the name for this lease object. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This value is
case-sensitive.
Lease Type Select the lease type for this lease object. You can choose from Prefix Delegation,
DNS Server, Address, Address Pool, NTP Server, or SIP Server.
Interface Select the interface for this lease object.
DUID If you select Prefix Delegation or Address in the Lease Type field, enter the DUID of
the interface.
Prefix If you select Prefix Delegation or Address in the Lease Type field, enter the IPv6
prefix of the interface.
DNS Server If you select DNS Server in the Lease Type field, select a request object or User
Defined in the DNS Server field and enter the IP address of the DNS server in the
User Defined Address field below.
Starting IP Address If you select Address Pool in the Lease Type field, enter the first of the contiguous
addresses in the IP address pool.
End IP Address If you select Address Pool in the Lease Type field, enter the last of the contiguous
addresses in the IP address pool.
NTP Server If you select NTP Server in the Lease Type field, select a request object or User
Defined in the NTP Server field and enter the IP address of the NTP server in the User
Defined Address field below.
SIP Server If you select SIP Server in the Lease Type field, select a request object or User
Defined in the SIP field and enter the IP address of the SIP server in the User Defined
Address field below.
User Defined
Address
If you select DNS Server, NTP Server, or SIP Server as your lease type, you must
enter the IP address of the server your selected.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving your changes.