Filter
Top Products
Chapter 1 Introduction
ZyWALL 110/310/1100 Series User’s Guide
26
Configuration Menu
Use the configuration menu screens to configure the ZyWALL’s features.
Cellular Status Displays details about the ZyWALL’s 3G connection status.
USB Storage Displays details about USB device connected to the ZyWALL.
VPN Monitor
IPSec Displays and manages the active IPSec SAs.
SSL Lists users currently logged into the VPN SSL client portal. You can also log
out individual users and delete related session information.
L2TP over
IPSec
Displays details about current L2TP sessions.
Log Lists log entries.
Table 7 Configuration Menu Screens Summary
FOLDER OR LINK TAB FUNCTION
Quick Setup Quickly configure WAN interfaces or VPN connections.
Network
Interface Port Role Use this screen to set the ZyWALL’s flexible ports as LAN1, WLAN,
or DMZ.
Ethernet Manage Ethernet interfaces and virtual Ethernet interfaces.
PPP Create and manage PPPoE and PPTP interfaces.
Cellular Configure a cellular Internet connection for an installed 3G card.
Tunnel Configure tunneling between IPv4 and IPv6 networks.
VLAN Create and manage VLAN interfaces and virtual VLAN interfaces.
Bridge Create and manage bridges and virtual bridge interfaces.
Trunk Create and manage trunks (groups of interfaces) for load
balancing.
Routing Policy Route Create and manage routing policies.
Static Route Create and manage IP static routing information.
RIP Configure device-level RIP settings.
OSPF Configure device-level OSPF settings, including areas and virtual
links.
Zone Configure zones used to define various policies.
DDNS DDNS Define and manage the ZyWALL’s DDNS domain names.
NAT Set up and manage port forwarding rules.
HTTP Redirect Set up and manage HTTP redirection rules.
ALG Configure SIP, H.323, and FTP pass-through settings.
IP/MAC
Binding
Summary Configure IP to MAC address bindings for devices connected to
each supported interface.
Exempt List Configure ranges of IP addresses to which the ZyWALL does not
apply IP/MAC binding.
DNS Inbound
LB
DNS Load
Balancing
Configure DNS Load Balancing.
Auth. Policy Define rules to force user authentication.
Table 6 Monitor Menu Screens Summary (continued)
FOLDER OR LINK TAB FUNCTION