Filter
Top Products
Chapter 10 Routing Protocols
ZyWALL 110/310/1100 Series User’s Guide
206
10.3.2 OSPF Area Add/Edit Screen
The OSPF Area Add/Edit screen allows you to create a new area or edit an existing one. To access
this screen, go to the OSPF summary screen (see Section 10.3 on page 201), and click either the
Add icon or an Edit icon.
Figure 119 Configuration > Network > Routing > OSPF > Add
Add Click this to create a new OSPF area.
Edit Double-click an entry or select it and click Edit to open a screen where you can
modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL confirms you want to
remove it before doing so.
# This field is a sequential value, and it is not associated with a specific area.
Area This field displays the 32-bit ID for each area in IP address format.
Type This field displays the type of area. This type is different from the Type field above.
Authentication This field displays the default authentication method in the area.
Apply Click this button to save your changes to the ZyWALL.
Reset Click this button to return the screen to its last-saved settings.
Table 75 Configuration > Network > Routing Protocol > OSPF (continued)
LABEL DESCRIPTION