Filter
Top Products
Chapter 16 IP/MAC Binding
ZyWALL 110/310/1100 Series User’s Guide
244
Figure 143 Configuration > Network > IP/MAC Binding > Edit > Add
The following table describes the labels in this screen.
16.3 IP/MAC Binding Exempt List
Click Configuration > Network > IP/MAC Binding > Exempt List to open the IP/MAC
Binding Exempt List screen. Use this screen to configure ranges of IP addresses to which the
ZyWALL does not apply IP/MAC binding.
Figure 144 Configuration > Network > IP/MAC Binding > Exempt List
The following table describes the labels in this screen.
Table 90 Configuration > Network > IP/MAC Binding > Edit > Add
LABEL DESCRIPTION
Interface Name This field displays the name of the interface within the ZyWALL and the interface’s IP
address and subnet mask.
IP Address Enter the IP address that the ZyWALL is to assign to a device with the entry’s MAC
address.
MAC Address Enter the MAC address of the device to which the ZyWALL assigns the entry’s IP
address.
Description Enter up to 64 printable ASCII characters to help identify the entry. For example, you
may want to list the computer’s owner.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving.
Table 91 Configuration > Network > IP/MAC Binding > Exempt List
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Click an entry or select it and click Edit to modify the entry’s settings.