Filter
Top Products
Chapter 6 Monitor
ZyWALL 110/310/1100 Series User’s Guide
89
The following table displays the maximum number of records shown in the report, the byte count
limit, and the hit count limit.
6.5 The Session Monitor Screen
The Session Monitor screen displays all established sessions that pass through the ZyWALL for
debugging or statistical analysis. It is not possible to manage sessions in this screen. The following
information is displayed.
• User who started the session
• Protocol or service port used
• Source address
• Destination address
• Number of bytes received (so far)
• Number of bytes transmitted (so far)
• Duration (so far)
You can look at all established sessions that passed through the ZyWALL by user, service, source IP
address, or destination IP address. You can also filter the information by user, protocol / service or
service group, source address, and/or destination address and view it by user.
Click Monitor > System Status > Session Monitor to display the following screen.
Figure 62 Monitor > System Status > Session Monitor
Table 25 Maximum Values for Reports
LABEL DESCRIPTION
Maximum Number of Records 20
Byte Count Limit 2
64
bytes; this is just less than 17 million terabytes.
Hit Count Limit 2
64
hits; this is over 1.8 x 10
19
hits.