Filter
Top Products
Chapter 28 Addresses
ZyWALL 110/310/1100 Series User’s Guide
385
Figure 251 Configuration > Object > Address > Address
The following table describes the labels in this screen. See Section 28.2.1 on page 386 for more
information as well.
Table 141 Configuration > Object > Address > Address
LABEL DESCRIPTION
IPv4 Address Configuration
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove
it before doing so.
Object
References
Select an entry and click Object References to open a screen that shows which settings
use the entry. See Section 7.3.2 on page 122 for an example.
# This field is a sequential value, and it is not associated with a specific address.
Name This field displays the configured name of each address object.
Type This field displays the type of each address object. “INTERFACE” means the object uses
the settings of one of the ZyWALL’s interfaces.
IPv4 Address This field displays the IPv4 addresses represented by each address object. If the object’s
settings are based on one of the ZyWALL’s interfaces, the name of the interface displays
first followed by the object’s current address settings.
IPv6 Address Configuration
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove
it before doing so.
Object
References
Select an entry and click Object References to open a screen that shows which settings
use the entry. See Section 7.3.2 on page 122 for an example.
# This field is a sequential value, and it is not associated with a specific address.
Name This field displays the configured name of each address object.